HAC-4200N
- The 4-door control panel supports up to T2 / Wiegand readers × 8 or RS-485 readers × 8.
- Built-in TCP / IP communication interface to PC.
- Built-in lithium battery ensures data storage can reach up to 1 year upon power outage.
- Supports entry modes through card swipe or Pin code or card swipe with Pin code.
- The memory capacity supports 100,000 cardholders and 100,000 events.
- Casing tamper switch and door ajar alarm.
- Provides 256 time zones & time schedules; Supports to set 8 time zones each day.
Features
- The 4-door control panel supports up to T2 / Wiegand readers × 8 or RS-485 readers × 8.
- Built-in TCP / IP communication interface to PC.
- Built-in lithium battery ensures data storage can reach up to 1 year upon power outage.
- Supports entry modes through card swipe or Pin code or card swipe with Pin code.
- The memory capacity supports 100,000 cardholders and 100,000 events.
- Casing tamper switch and door ajar alarm.
- Provides 256 time zones & time schedules; Supports to set 8 time zones each day.
- Provides two groups of holiday setting; Each holiday group supports 100 holidays.
- Supports conditional unlock door schedules.
- Able to connect T2 / W26 / W34 / RS-485 slave reader.
- Support Anti-passback setting.
- Blacklist function and duress card/code setting. When door opened in an emergency, controller will send signal to control center at the same time for tracing and rescue.
- Adjustable Push Button、Door Sensor mode (NO/NC) and door sensor detection time.
- Supports remote door unlock.
- Supports multiple-door interlock function and multiple cards authorization function.
- Provides login and logout functions, and does not allow connection devices or operating Web interfaces to provide enhanced security controls without logging in to the device.
- Built-in Web Server; Able to control functions through the browser.
Specification
|
Model No. |
HAC-4200N |
|
No. of door for control |
4 |
|
Cardholders |
100,000 |
|
Events |
100,000 |
|
Slave Reader |
T2 / Wiegnad readers × 8 or RS-485 readers × 8 |
|
Input Ports |
Push Button x 4, Door Sensor x 4, Case Sensor x 1 |
|
Output Port (Built-in) |
Door Relay x 4, Alarm Relay x 4, O.C. Output x 2 |
|
I/O Ports |
TTL Input x 8 |
|
LED Indicator |
R LED × 1 (PWR); R LED × 8 (Relay LED); |
|
Real Time Clock |
Yes |
|
Backup Battery |
Yes (CR2032, replaceable) |
|
Beep Tone |
Buzzer |
|
Comm. Interface |
TCP/IP x 1：10/100 Mbps |
|
Power Input |
DC 12V ± 10% (including electronic fuses and |
|
Current Consumption |
1 A (max. excluding slave reader) |
|
Operating Temp. |
-40˚C ~ 70˚C / -40˚F ~ 158˚F |
|
Relative Humidity |
20% ~ 80%(Non-condensing) |
|
Dimension |
150mm(L) x 210mm(W) x 40mm(H) |
|
Weight |
380g |
